3DR Solo Accessory Breakout Board

$50.00$55.00

The 3DR Solo Accessory Breakout Board allows secondary accessories and additional communications hardware and high power devices to be connected to the 3DR Solo Accessory Bay.

Clear
SKU: ABB Category: Tag:

Description

The 3DR Solo Accessory Breakout Board allows secondary accessories and additional communications hardware and high power devices to be connected to the 3DR Solo Accessory Bay. The Accessory Bay is the area behind the 3DR Gimbal under the Solo that does not interfere with the gimbal. Hardware can be attached using the holes provided and connect to the iMX6 (Companion computer) via USB.

The board is fully assembled and includes:

  • 4p Click-Mate CAN
  • 6p Click-Mate Serial
  • Zener Diode
  • 30p JAE Connector
  • Micro USB iMX OTG USB

Specs

  • Accessory Bay Area – 7.6cm x 13.3cm x 10.2cm
  • Maximum Payload: 700g
  • Accessory Bay Hole Pattern: M2 @ 63mm x 41mm rectangular
  • Power
  • VCC 5V (4.75V to 5.4V)
  • VCC Battery (12V to 16.8 V)

Designed by ProfiCNC.

Manufactured by OSH Park.

Includes shipping to CONUS. Int’l shipping extra.

For more info regarding the 3DR Solo Accessory Bay
http://dev.3dr.com/hardware-accessorybay.html

Open Source Reference
https://github.com/3drobotics/Pixhawk_OS_Hardware/tree/master/Accessory_Breakout_X1

Additional information

Weight 0.5 lbs
Headers Installed

Yes, No

1 review for 3DR Solo Accessory Breakout Board

  1. 1 out of 5

    The port can act as either host or as a device, but typically the iMX6 acts as the host and the accessory as a connected USB device.

Add a Review